search

Video Balun

Product Description:

Video and Power Balun

Features

 

 

·Big terminal screw block for CAT5 cable, solid connection than unsolidified RJ45 Jack

 

 

·Direct screw connection instead of complex CAT5 cable to RJ45 connector building
·Video and power transmission via one UTP CAT5 cable.
·Over 10-20% wire costs saved.
·Full-motion CCTV video at distances up to 2000ft B/W(600m), 1500ft Color (400m)
·Building video and power filter and loop termination circuit
·'HUM-BARs' rejective video POE BALUN transceiver
·Outstanding interference rejection and transient surge protection.
·Building in lightning protection gas tuber for both video and power/POE channels
·Common mode coil choke for power- POE line noise rejection, low power noise emissions
·Male BNC with 120mm coaxial cable allows connection directly to the camera or DVR.
·Male and Female power connector with 120mm cable allows POE transmission.
·12Vto 48VDC/ACpower from UT102PV-M, and output from UT102PV-F.
·Up to 3,000ft (1km) with active receiver or hub.
·For more information, please contact with authorized distributors.
 
 
Specification
 

Attenuation
DC to 6 Mhz: 1.5 dB max

Common-mode rejection
Video:15KHz to 5 Mhz: 60 dB typ
Power:10KHz to 100Khz: 60 dB typ

Return loss rjection

                                Video: Over 18dB @1Mhz

Impedance
Coax Cable, Male BNC75 ohms
UTP, Screw Terminals 100 ohms

Wire Type
Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal
Category Type: Cat 2 or better
Impedance: 100 ± 20 ohms
DC Loop Resistance: 26 ohms max
Differential Capacitance: 19 pF/ft max
Wire Length: Camera to monitor including coax, 1,000 ft (300m) , up to 2000ft max (600m) B/W signal

Connector Interfaces
Video: Male BNC connector with 120mm coxial cable
Power: Male/Female power connectors with 120mm cable (UT102PV-M UT102PV-F)
Network Interface: 2 screw terminals for one UTP pair video and 2 screw terminals for 3 UTP pair power cables

Environmental
Temperature: 0 to +50°C
Humidity (non-condensing): 0 to 95%
ESD Susceptibility (200 pf probe) : 20 KV

Mechanical
Dimensions: 85*38*22mm with 120mm coxial and power female/male cable
Weight: 90g
Material: Black ABS
Mounting: No needed
Package: Paper Box


Pre:Video Balun      Next:Video Balun